Specifications for Conserv SCS-1 Sensor, Version 2
Conserv's SCS-1 Smart Collection Sensor is designed specifically for collection care use cases. It measures temperature, humidity, visible light levels, and movement. This device has a Texas Instruments HDC2080 sensor.
TL;DR Facts
- As long as you maintain an active subscription, your sensors will be replaced and recalibrated as needed - think of it as a perpetual warranty.
- We automatically send you new sensors every 3 years. This handles your recalibration issue.
- The sensor includes temperature, relative humidity, illuminance, and movement readings at above average levels of accuracy.
- The battery life is between 36-48 months
Physical Specifications
| Size | 3" W x 3" L x 1" H |
| Mounting | Mounts with magnets or command strips |
| Notes | Vertical mounting is recommended to minimize dust accumulation on sensing elements |
Temperature Sensor Specifications
| Temperature Range | Operating: –40°C to 85°C Functional: –40°C to 125°C |
| Temperature Accuracy | ±0.2°C (typical), ±0.4°C (maximum) |
| Repeatability | ±0.1°C |
| Conversion Time | 1 sec |
Relative Humidity Specifications
| RH Range | 0% to 100% (non-condensing) |
| RH Accuracy | ±2% (typical), ±3% (maximum) |
| RH Repeatability | ±0.1% |
| Hysteresis | ±1% |
| Response Time | 8 sec |
| Long Term Drift | ±0.25% / Year |
Warning: While the sensor may be both operational and functional at very low (freezing) temperatures, please be aware that this sensor is not waterproof and it has not been designed to withstand condensation. Condensation caused by taking the sensor in and out of freezing conditions may damage the internal components. If you wish to use a sensor designed for freezer conditions, we suggest you look into our cold sensor instead.
Visible Light Specifications
| Resolution | < 100 mlx |
| Maximum Dynamic Range | 64 klx |
Spectral Response vs. Wavelength
Response vs. Illuminance Angle
Movement Detection Specifications
| Measurement Type | Threshold based alerting |
| Axis | 3 axis (X,Y,Z) |
| Bias Calibration | Automatic on startup |
Network Specifications
| Network Type | LoRaWAN 1.0.2 |
| Encryption | AES128 |
| Maximum Output Power | 28mW |
| Operating Frequency | US ISM 915mhz |
| Operating voltage | 3.6v |
Battery Specifications
| Battery type |
LiSOC2 Lithium, AA size |
| Typical Battery Life |
36-48 months |
| Battery voltage | 3.6v |
| Battery capacity | 2x 2400mAh, total 4800mAh |
| Average sleep power consumption | 50uA |
| Configuration mode power consumption | 8mA |
| Average transmission power consumption | 2.5mA |
You can read more detail about our battery life specifications, https://support.conserv.io/knowledge/battery-life-spec